Chiller Unit/Cooling Chiller
  • Feature
  • Technical parameter
  • Application
  • Service
  • FAQ
Products Features
1. Twin screw compressor brand is employed, with high efficiency, low noise level, less wearing and long operation time.
2.Four stage volume control or 0%-100% automatic regulation.
3.Use PLC microcomputer control from Germany SIEMENS. LCD touch screen, both English and Chinese human-machina intertace.
4.Complete breakdown protection: high and low pressure protection, air discharge protection, oil level protection, water flow protection, reverse and lack phase protection, chilled water anti-freezing protection, cooling water overheat protection.
5.Wider range of varibale chilled water temperature to meet the low temperature industrial requirements.

Product options
1.Salt water evaporator
2.Stepless energy regulation
3.Pump/Cooling tower control
4.Special power supply
5.Remote communication connector

Product specfication
Refrigerant: R22/R407C
Evaporator max water pressure drop: 1.0Mpa
Evaporator: fouling factor 0.018m2.℃/KW
Condenser: fouling factor 0.044m2.℃/KW
Power supply: 380V/3P/50Hz
Allowable voltage fluctuate: ±5%
Allowable frequency fluctuate: ±2%

Compressor
Select semi-closed 5:6 asymmetric twin-screw compressor from world-renowned brand. The possibility of shaft seal leakage is zero. Using a rotating exhaust design, the lastest development of the fourth generation line, optimize the circumference speed, excellent design of gear so that the unit has higher compression efficiency. Motor chamber compression chamber integrally cast, high precision. Double pressure compensated rotor housing, very strong, no expansion even in the state of high pressure, and it effectively reduces the noise.

Heat exchanger
The condenser and evaporator of this series unit adopts shell and tube heat exchanger, using new high efficient heat exchanger structure. Heat exchanger adopts the most advanced and effcient heat exchanger tube bundle with unique geometric characteristics and enhanced tube nucleate boiling required vaporization core, strengthen the fluid in the tube and delay perturbationat the same time, the water side fouling, heat transfer enhanment, the inside wall in order to get the best performace, comparade to the previous design, the unique design of the heat transfer efficiency is increased by 30%.
Evaporator evapotation tube with inner grooved on outer concave tooth enhanced heat transfer technology, condenser tube with inner grooved cutter teeth technology, improves the evaporator and condenser heat transfer efficiency and the evaporation temperature, and improve the energy efficiency ratio for the unit.

PLC
A good Chinese-English interactive interface is to achieve automatic control function before the LCD display real-time statues of the machine work, precise monitoring unit operating at optimun state, the touch pannel sealed, waterproof, dustproof, corrosion-resistant, long-key life. Equipped with cooling pumps, cooling water pumps and cooling tower fan interlock control function.

Application
Chemical, chemical fiber, plastic, oil, food, pharmaceutical, military, printing, painting, electroplating, electronics and other industries
Water cooled screw chiller(double compressor) -15℃ technical parameter

VW-
Model 80DY 110DY 150DY 160DY 200DY 210DY 250DY 260DY 280DY 310DY
Nominal cooling capacity kw 80.0 110.0 150.0 160.0 200.0 210.0 250.0 260.0 280.0 310.0
104 kcal/h 6.9 9.5 12.9 13.8 17.2 18.1 21.5 22.4 24.1 26.7
Operating control method Use PLC microcomputer control
Power Supply 380V/3N/50HZ
Startup type Y-△
Compressor Type Semi-closed 5:6 asymmetric twin-screw compressor
Input power(kw) 38.0 50.0 60.0 68.0 84.0 90.0 100.0 106.0 106.0 128.0
Rated current(A) 65.8 86.6 108.8 119.2 145.2 158.2 178.0 187.2 206.2 224.8
Energy regulation 0-16.5%-33%-...100% 0-12.5%-25%-37.5%-...100%
Evaporator Type High efficiency dry type shell and tube heat exchanger
Flow(L/min) 16.1 22.1 30.2 32.2 40.2 42.2 50.3 52.3 56.3 62.3
Water pressure drop(kPa) 50.0 50.0 54.0 54.0 58.0 58.0 60.0 60.0 63.0 63.0
Interface size DN50 DN65 DN80 DN100
Condenser Type High efficiency shell and tube heat exchanger
Flow(L/min) 20.3 27.5 36.1 39.2 48.8 51.6 60.2 63.0 66.4 75.3
Water pressure drop(kPa) 45.0 45.0 48.0 48.0 52.0 52.0 55.0 55.0 58.0 58.0
Interface size DN65*2 DN80*2 DN100*2
Refrigerant Type R22
Refrigerant volume(kg) 20.5 28.1 38.4 40.9 51.2 53.7 64.0 66.5 71.6 79.3
Overall dimensions Length(mm) 3570 3570 3570 3570 3570 3570 3570 3570 3570 4100
Width(mm) 1050 1100 1190 1190 1240 1280 1320 1320 1380 1400
Height(mm) 1530 1530 1540 1580 1650 1650 1650 1650 1700 2100
Weight Machine weight(kg) 1500 1700 1950 2150 2250 2450 2850 2900 3050 3500
Operating weight(kG) 1785 2035 2435 2535 2620 2970 3410 3460 3680 3930

VW-
Type 340DY 400DY 420DY 460DY 500DY 520DY 600DY 660DY 720DY 800DY
Nominal cooling capacity kw 340.0 400.0 420.0 460.0 500.0 520.0 600.0 660.0 720.0 800.0
104 kcal/h 29.2 34.4 36.1 39.6 43.0 44.7 51.6 56.7 61.9 68.8
Operating control method Use PLC microcomputer control
Power Supply 380V/3N/50HZ
Startup type Y-△
Compressor Type Semi-closed 5:6 asymmetric twin-screw compressor
Input power(kw) 142.0 164.0 174.0 188.0 202.0 210.0 246.0 272.0 290.0 320.0
Rated current(A) 250.2 290.4 306.6 332.2 357.6 369.0 425.2 471.8 501.0 563.4
Energy regulation 0-12.5%-25%-37.5%-...100%
Evaporator Type High efficiency dry type shell and tube heat exchanger
Flow(L/min) 68.3 80.4 84.4 92.5 100.5 104.5 120.6 132.7 144.7 160.8
Water pressure drop(kPa) 65.0 75.0 80.0 85.0 85.0 90.0 90.0 95.0 110.0 105.0
Interface size DN100 DN125 DN150 DN200
Condenser Type High efficiency shell and tube heat exchanger
Flow(L/min) 82.9 97.0 102.2 111.5 120.7 125.6 145.5 160.3 173.7 192.6
Water pressure drop(kPa) 58.0 60.0 60.0 60.0 65.0 65.0 70.0 70.0 72.0 74.0
Interface size DN125*2 DN150*2 DN200*2
Refrigerant Type R22
Refrigerant volume(kg) 87.0 102.3 107.5 117.7 127.9 133.1 153.5 168.9 184.2 204.7
Overall dimensions Length(mm) 4100 4100 4500 4500 4500 4500 4500 4500 4900 4900
Width(mm) 1400 1400 1450 1500 1500 1500 1550 1550 1550 1550
Height(mm) 2150 2150 2380 2400 2400 2470 2470 2470 2470 2470
Weight Machine weight(kg) 3750 4250 5050 5750 5750 6550 6850 7850 7950 8100
Operating weight(kG) 4170 4670 5650 6350 6385 7135 7435 8485 8685 8885

Cooling condition: Chilled water inlet/outlet temperature -10/-15 ℃, cooling water inlet/outlet temperature 30/35 ℃
Temparature term: Chilled water outlet temperature range -17~-7 ℃, cooling water inlet temperature range 19~33 ℃
Chemical, chemical fiber, plastic, oil, food, pharmaceutical, military, printing, painting, electroplating, electronics and other industries
Pre-sale services

1. Professional and technical consultation and communication.

2. Equipment selection and quotation.

3. Product application solutions recommendations.

4. Engineering solutions.

After-sale services

Warranty: 12 months guarantee for all products.

Within warranty, any problem caused by the defects of the machine itself, we will offer its service until the problem solved.

Over warranty, we will offer maintenance activity by cost only.


Product Catalog